Mark’s Trains and Wickness Models are pleased to introduce the ‘MarWick’ Brush Insulating Sleeve – for easy DCC conversion of early Graham Farish locomotives. This is a joint venture by Mark’s Trains and Wickness Models.
The ‘MarWick’ sleeve was designed and manufactured to aid the conversion of early Graham Farish ‘Poole’ built locomotives to DCC. With no chassis drilling required, no mess, and a quick and easy installation.
The ‘MarWick’ Brush Insulating Sleeve has been designed and manufactured to the exact measurements of the original Graham Farish brass brush sleeve, used to aid the conduction of electricity between the chassis and brush. The ‘MarWick’ Brush Insulating Sleeve is manufactured from a Polyoxymethylene copolymer (POM-C) also known as Acetal. It is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity. It has a melting point of 175°C.
The ‘MarWick’ Brush Insulating Sleeve is designed as a direct replacement to insulate the brush and spring from the chassis to allow easy and simple conversion to DCC, and by insulating the retaining clip with the Kynar heat-shrink provided, this provides the complete isolation from the chassis and track pick-up required for a successful DCC conversion to take place.
‘MarWick’ Brush Insulating Sleeves are available in single packs, and bulk packs of 10 giving you 10% off. The packs include Kynar heat shrink tubing to allow easy insulation of the brush retaining clip, and full installation instructions. The instructions can also be downloaded here for easier viewing.
The single pack costing £3.95 is available to purchase here and the bulk pack costing £35.55 is available to purchase here. All orders are delivered using Royal Mail’s Signed For service, and dispatched the same day if ordered before 3 pm.
