Mark's Trains Ltd, Workspace House, 28-29 Maxwell Road, Peterborough, PE2 7JE    01733 609 414

MIG 2053 Glossy Lucky Varnish

£6.25

Ammo MIG 2053 Glossy Lucky Varnish

Supplied in a 60ml Bottle.

Flat medium/varnish for all kinds of acrylic paints. Guarantees 100% flat finishes.

6 in stock (can be backordered)

GTIN: 8432074020530 SKU: A.MIG-2053 Category: Tag:

Ammo MIG 2053 Glossy Lucky Varnish

Supplied in a 60ml Bottle.

Flat medium/varnish for all kinds of acrylic paints. Guarantees 100% flat finishes. This varnish can be used in two different ways:
– used straight from the jar as a regular varnish after painting to achieve a dead flat finish.
– it can also be used as a flat medium by adding it to acrylic paints.

Varnish application has long been one of the biggest challenges for modellers. Many have ruined a few models due to the use of poor quality or inappropriate varnishes for the job at hand, and the thing is that the varnishing process is an extremely important step of the build. For the first time, AMMO releases a complete varnish range for winning results on each and every model.

These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple manner. It must be used in thin layers and can be applied directly from the jar without thinning for a perfect finish. When used through the airbrush, we recommend spraying 6 inches (15 cm) away from the surface. It is non-toxic, odourless and dries completely in 24 hours.

This new varnish range was carefully developed over a lengthy period to ensure the modeller a perfect result every time. Don´t take your chances, use LUCKY VARNISH, a winning product that will rule out any mishap that may occur when using ordinary varnishes. Available in all the usual finishes used in scale modelling, from high gloss to dead flat.

Easy to use and simple to clean. Incredible transparent finishes for all of your models, and accurate for all subjects. Will not yellow or alter colours.

Perfect for both brush and airbrush.
1- Using an airbrush, apply in light and short passes using 1.2 bar (17psi) air pressure, avoiding build-up.
2- Let dry for at least 5 minutes between coats. Do NOT flood the surface.
3- Let it dry completely for 12 hours.
No thinning is needed. Clean with MIG 2000 Acrylic Thinners or water.

Ammo MIG 2053 Glossy Lucky Varnish

Supplied in a 60ml Bottle.

Flat medium/varnish for all kinds of acrylic paints. Guarantees 100% flat finishes. This varnish can be used in two different ways:
- used straight from the jar as a regular varnish after painting to achieve a dead flat finish.
- it can also be used as a flat medium by adding it to acrylic paints.

Varnish application has long been one of the biggest challenges for modellers. Many have ruined a few models due to the use of poor quality or inappropriate varnishes for the job at hand, and the thing is that the varnishing process is an extremely important step of the build. For the first time, AMMO releases a complete varnish range for winning results on each and every model.

These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple manner. It must be used in thin layers and can be applied directly from the jar without thinning for a perfect finish. When used through the airbrush, we recommend spraying 6 inches (15 cm) away from the surface. It is non-toxic, odourless and dries completely in 24 hours.

This new varnish range was carefully developed over a lengthy period to ensure the modeller a perfect result every time. Don´t take your chances, use LUCKY VARNISH, a winning product that will rule out any mishap that may occur when using ordinary varnishes. Available in all the usual finishes used in scale modelling, from high gloss to dead flat.

Easy to use and simple to clean. Incredible transparent finishes for all of your models, and accurate for all subjects. Will not yellow or alter colours.

Perfect for both brush and airbrush.
1- Using an airbrush, apply in light and short passes using 1.2 bar (17psi) air pressure, avoiding build-up.
2- Let dry for at least 5 minutes between coats. Do NOT flood the surface.
3- Let it dry completely for 12 hours.
No thinning is needed. Clean with MIG 2000 Acrylic Thinners or water.

Additional information

Weight 0.06 kg
Dimensions 60 × 60 × 120 mm
Brand

AMMO Mig

Reviews

There are no reviews yet

Be the first to review “MIG 2053 Glossy Lucky Varnish”

Your email address will not be published. Required fields are marked *

Overall rating*
0/5
* Rating is required
Was this item value for money?
0/5
* Rating is required
Were you happy with the speed of despatch?*
0/5
* Rating is required
Were you happy with the speed of delivery?*
0/5
* Rating is required



This site uses Akismet to reduce spam. Learn how your comment data is processed.