Mark's Trains Ltd, Workspace House, 28-29 Maxwell Road, Peterborough, PE2 7JE    01733 609 414

ModelTech N ProTrack Rail Isolator

(1 customer review)

£10.00

ModelTech – N ProTrack Rail Isolator

Fed up creating isolated track sections using those fiddly plastic fishplates, only to find your trains keep derailing because the plastic fishplates flex too much, and offer no real support to the rails?

ModelTech’s new ProTrack Rail Isolator solves this problem and provides a convenient method for isolating track sections whilst keeping the rails perfectly in line. Say goodbye to those fiddly plastic fishplates and derailments, simply solder the rails to the solder pads provided and enjoy derailment free running.

Each kit includes 4 pieces, Compatible with both code 55 and 80 track.

8 in stock (can be backordered)

GTIN: N/A SKU: TIS09001 Category: Tag:

ModelTech – N ProTrack Rail Isolator

Fed up creating isolated track sections using those fiddly plastic fishplates, only to find your trains keep derailing because the plastic fishplates flex too much, and offer no real support to the rails?

ModelTech’s new ProTrack Rail Isolator solves this problem and provides a convenient method for isolating track sections whilst keeping the rails perfectly in line. Say goodbye to those fiddly plastic fishplates and derailments, simply solder the rails to the solder pads provided and enjoy derailment free running.

As with ModelTech’s ProTrack Rail Aligners, through-holes are provided so that dropper wires can be soldered into place on either side for each track section, along with pre-drilled holes for track pins. Code 55 track will require a 1mm shim to match the correct rail height, usually a piece of styrene sheet does the trick.

Each kit includes 4 pieces, Compatible with both code 55 and 80 track.

ModelTech - N ProTrack Rail Isolator

Fed up creating isolated track sections using those fiddly plastic fishplates, only to find your trains keep derailing because the plastic fishplates flex too much, and offer no real support to the rails?

ModelTech's new ProTrack Rail Isolator solves this problem and provides a convenient method for isolating track sections whilst keeping the rails perfectly in line. Say goodbye to those fiddly plastic fishplates and derailments, simply solder the rails to the solder pads provided and enjoy derailment free running.

As with ModelTech's ProTrack Rail Aligners, through-holes are provided so that dropper wires can be soldered into place on either side for each track section, along with pre-drilled holes for track pins. Code 55 track will require a 1mm shim to match the correct rail height, usually a piece of styrene sheet does the trick.

Each kit includes 4 pieces, Compatible with both code 55 and 80 track.

Additional information

Weight 0.06 kg
Dimensions 120 × 80 × 50 mm
Brand

ModelTech

1 review for ModelTech N ProTrack Rail Isolator

  1. MW

    Mark W. (verified owner)

    Great bit of kit.

Add a review

Your email address will not be published. Required fields are marked *

Overall rating*
0/5
* Rating is required
Was this item value for money?
0/5
* Rating is required
Were you happy with the speed of despatch?*
0/5
* Rating is required
Were you happy with the speed of delivery?*
0/5
* Rating is required



This site uses Akismet to reduce spam. Learn how your comment data is processed.