Digikeijs DR4024 4 channel servo decoder
£30.13
Digikeijs DR4024 – 4 channel servo decoder with 4 extra switching outputs
The DR4024 DIGISERVO decoder is a fully programmable servo decoder. Each servo output has an extra switching output to switch, for example, a panel light or decoupling track. Each output can be calibrated with software which makes fitting servos a lot easier because they are set up after installation. The DR4024 DIGISERVO decoder is the first servo decoder to work on the basis of function mapping. The decoder reads the switching addresses as control functions for the various outputs. Depending on the mapping that has been set up, the decoder can use from 1 to 8 switching addresses.
Ordered on request, delivered within 3 – 5 working days.
Discontinued
Email me when this is back in stock
Digikeijs DR4024 – 4 channel servo decoder with 4 extra switching outputs
The DR4024 DIGISERVO decoder is a fully programmable servo decoder. Each servo output has an extra switching output to switch, for example, a panel light or decoupling track. Each output can be calibrated with software which makes fitting servos a lot easier because they are set up after installation. The DR4024 DIGISERVO decoder is the first servo decoder to work on the basis of function mapping. The decoder reads the switching addresses as control functions for the various outputs. Depending on the mapping that has been set up, the decoder can use from 1 to 8 switching addresses.
Features of the DR4024
- 4 servo outputs
- 4 switching outputs
- Power indicator
- Activity indicator
- Mass simulation (e.g. semaphores)
- Servo calibration via the control unit
- Detailed mapping function
- Multi-protocol (DCC/MM)
- Fully CS2-compatible
- POM (Programming on Main)
- Separate power and signal input
Technical features
Power consumption: 15mA
Maximum servo load: 500mA per servo output (2 Amps total)
Maximum switching load: 1 Amp per output (3 Amps total)
Digikeijs DR4024 - 4 channel servo decoder with 4 extra switching outputs
The DR4024 DIGISERVO decoder is a fully programmable servo decoder. Each servo output has an extra switching output to switch, for example, a panel light or decoupling track. Each output can be calibrated with software which makes fitting servos a lot easier because they are set up after installation. The DR4024 DIGISERVO decoder is the first servo decoder to work on the basis of function mapping. The decoder reads the switching addresses as control functions for the various outputs. Depending on the mapping that has been set up, the decoder can use from 1 to 8 switching addresses.
Features of the DR4024
- 4 servo outputs
- 4 switching outputs
- Power indicator
- Activity indicator
- Mass simulation (e.g. semaphores)
- Servo calibration via the control unit
- Detailed mapping function
- Multi-protocol (DCC/MM)
- Fully CS2-compatible
- POM (Programming on Main)
- Separate power and signal input
Technical features
Power consumption: 15mA
Maximum servo load: 500mA per servo output (2 Amps total)
Maximum switching load: 1 Amp per output (3 Amps total)
Additional information
| Weight | 0.25 kg |
|---|---|
| Dimensions | 300 × 300 × 120 mm |
| Brand | Digikeijs |
Related products
-
DiscontinuedDigikeijs DR100 N carriage lighting installation kit
£13.94 – £16.30 Select options This product has multiple variants. The options may be chosen on the product page -
Discontinued
Digikeijs DR60035 50cm servo extension cable
£6.47 Read more -
Discontinued
Digikeijs DR5013 DigiReverse ultimate reverse loop module
£90.95 Read more
Reviews
There are no reviews yet