Terminal block strip – 16A 10-way

Terminal block strip – 16A 10-way for layout wiring connections

10-way terminal block strip which is ideal for use on model railway baseboards and other layout wiring connections. This block can handle currents of up to 16A with its large copper screw terminal housings, and has a large enough diameter for use on DCC track buses.

It is a cost effective method for connecting track dropper wires to the track bus, there is no need for soldering wires together under the baseboard and is a much safer alternative. This block can also be used for other layout wiring, such as lighting, accessory control circuits & control panels, where a solid and secure connection is needed. The screw terminals provide flexibility for wires to be moved about or replaced at a later date, and is much easier than having to cut soldered wire and risk getting hot solder in your eyes (whilst laying under the baseboard) soldering new connections.

Cut the terminal block strip to your required size by using a small saw or carefully with a sharp knife. Screw the terminal block to your base board via the holes between the terminals using suitable sized screws.

This is a high strength product and is non-flammable, it has acid and erosion control, well insulated and will not deteriorate with age. Tested on 400V at 16A.